Waterproof Stripe Triangle Sun Shade Sail | Coastal

Combining several shade sails presents an effective solution for shading expansive or irregular areas. There are two approaches to achieve this: installing the shade sails beside each other or slightly overlapping them.

Opting for the overlapping method offers the advantage of eliminating any gaps in shade coverage that might occur with a side-by-side setup. To ensure the sails remain undamaged, it is advisable to keep a minimum distance of 12 inches between them, thus preventing any chafing between the fabrics.

Size selection:When choosing a shade sail, opt for a size smaller than the coverage area (check our Measure & Installation guide below for detailed instructions). This allowance will leave enough room for tensioning and adjustments, minimizing the risk of sagging in the middle.

Proper Installation: Ensure that the shade sail is correctly tensioned and installed at a suitable angle. This helps water to naturally run off the surface instead of pooling.

Correct Slope and Angle:Design the shade sail with a sufficient slope or angle to facilitate water runoff. This prevents water from accumulating on the surface and causing pooling.

Regular Maintenance:We strongly recommend not leaving the shade sail exposed to rain for extended periods. During rainfall, at least one corner should be detached to prevent water from accumulating in the middle of the shade sail.

Our sun shade sail can be secured to existing structures like walls and roofs, provided they can withstand the sail's pulling force. Alternatively, you can use dedicated support poles and hardwares designed to be strategically positioned and highly durable.

For proper drainage, it is advisable to have at least one corner set at a lower height than the others, tilting the surface by approximately 40°. This ensures effective rainwater runoff.

It is also crucial to consider the changing path of sunlight, not only throughout the day but also across different seasons. This will help determine the optimal positioning of your shade.

For instance, if your shade sail provides sufficient coverage during midday, it may not be as effective in the afternoon. To address this fluctuation in sun shadow, it is recommended to increase the overall area of the shade, particularly on the east and northeast sides.

Due to fabric width limitations, and depending on the size ordered, your shade sail may have seams.

To ensure both an aesthetically pleasing appearance and uninterrupted waterproof performance, we make sure to place the seams along the central axis or midline, ensuring symmetry on both sides.