Measuring Guide


Grommet Top
Rod Pocket & Back Tab
Top & Bottom Grommet
Double Rod Pocket
Single Rod Pocket
Tab Top

Measurement of Curtain Width

Recommend Fullness

 

If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1.5-2 for creating waves and folds when it’s closed. 

Recommended Curtain Width = Curtain Pole Length x Fullness Ratio

If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:

  1. Measurement A

Measure the full width of your window; if it is in a recess, measure the full width of the recess.
  1. Measurement B

For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.
  1. Measurement C

Add up Measurements A+B+B from steps 1 and 2, this will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.
  1. Recommended curtain width

Finally, multiply C by 1.5-2, depending on the fullness you would like to have.

Recommended Curtain Width = 1.5 to 2 x Measurement C 

Measurement of Curtain Length

Sill Length

Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.

Below Sill

Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).

Floor Length

Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).



 Example

Measurement of Curtain Width

Recommend Fullness

If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1.25-2 for creating waves and folds when it’s closed.

Recommended Curtain Width = Curtain Pole Length x Fullness Ratio

If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:

      1. Measurement A

    Measure the full width of your window; if it is in a recess, measure the full width of the recess.
           2. Measurement B
      For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.
             3. Measurement C
        Add up Measurements A+B+B from steps 1 and 2, this will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.
               4. Recommended curtain width

          Finally, multiply C by 1.25-2, depending on the fullness you would like to have.

          Recommended Curtain Width = 1.25 to 2 x Measurement C 

          Measurement of Curtain Length

          Sill Length

          Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.

          Below Sill

          Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).

          Floor Length

          Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).

           

           

           Example

          Measurement of Curtain Width

          Recommend Fullness

          If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1.5-2 for creating waves and folds when it’s closed.

          Recommended Curtain Width = Curtain Pole Length x Fullness Ratio

          If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:

                1. Measurement A

          Measure the full width of your window; if it is in a recess, measure the full width of the recess.
                2. Measurement B
          For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.
                 3. Measurement C
          Add up Measurements A+B+B from steps 1 and 2, this will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.
                 4. Recommended curtain width

          Finally, multiply C by 1.5-2, depending on the fullness you would like to have.

          Recommended Curtain Width = 1.5 to 2 x Measurement C 

          Measurement of Curtain Length

          Sill Length

          Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.

          Below Sill

          Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).

          Floor Length

          Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).

           

           

           Example

          Measurement of Curtain Width

          Recommend Fullness

          If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1-2 for creating waves and folds when it’s closed.

          Recommended Curtain Width = Curtain Pole Length x Fullness Ratio

          If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:

                1. Measurement A

          Measure the full width of your window; if it is in a recess, measure the full width of the recess.

                 2. Measurement B

          For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.

                  3. Measurement C

          Add up Measurements A+B+B from steps 1 and 2, this will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.

                  4. Recommended curtain width

          Finally, multiply C by 1-2, depending on the fullness you would like to have.

          Recommended Curtain Width = 1 to 2 x Measurement C 

          Measurement of Curtain Length

          Sill Length

          Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.

          Below Sill

          Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).

          Floor Length

          Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).

           

           Example

          Measurement of Curtain Width

          Recommend Fullness

          If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1-2 for creating waves and folds when it’s closed.

          Recommended Curtain Width = Curtain Pole Length x Fullness Ratio

          If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:

                1. Measurement A

          Measure the full width of your window; if it is in a recess, measure the full width of the recess.
                 2. Measurement B
          For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.
                  3. Measurement C
          Add up Measurements A+B+B from steps 1 and 2, this will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.
                  4. Recommended curtain width

          Finally, multiply C by 1-2, depending on the fullness you would like to have.

          Recommended Curtain Width = 1 to 2 x Measurement C  

          Measurement of Curtain Length


          Sill Length

          Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.

          Below Sill

          Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).

          Floor Length

          Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).


           

           Example

          Measurement of Curtain Width

          Recommend Fullness

          If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1-1.5.

          Recommended Curtain Width = Curtain Pole Length x Fullness Ratio

          If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:

                1. Measurement A

          Measure the full width of your window; if it is in a recess, measure the full width of the recess.

                 2. Measurement B

          For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.

                 3. Measurement C

          Add up Measurements A+B+B from steps 1 and 2. This will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.

                 4. Recommended curtain width

          Multiply C by 1-1.5, depending on how much of fullness you would like you would like to have.

          Recommended Curtain Width = 1 to 1.5 x Measurement C

           ②

          Measurement of Curtain Length

          ⒶSill Length

          Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.

          ⒷBelow Sill

          Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).

          ⒸFloor Length

          Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).

           

           

          Example

          Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
          January,February,March,April,May,June,July,August,September,October,November,December
          Not enough items available. Only [max] left.
          Add to WishlistBrowse WishlistRemove Wishlist
          Shopping cart
          Free Shipping for all orders over [money]
          Almost there, add [money] more to get FREE SHIPPING!
          Congratulations! You've got free shipping!

          Your cart is empty.

          Return To Shop

          Add Order Note Edit Order Note
          Estimate Shipping
          Add A Coupon

          Estimate Shipping

          Add A Coupon

          Coupon code will work on checkout page